Our Rail Car Unloading Systems have been design for optimizing the unloading of rail cars into resin storage silos and/or storage bins. PCC systems have been designed with the proper balance of maximizing the unloading rate and still maintaining the raw material integrity. Many years of experience in plastic processing enable our Project Engineers to accurately size each system to provide the most reliable and cost effective solution.
 |
VP Series Vacuum-Pressure Power Unit
As the most cost effective solution for conveying bulk materials, the VP series uses a single pump design in which the same blower is used for both vacuum and pressure and incorporates a central transfer station. This series is used in applications where conveying distances are generally shorter and the conveying rates required are not as demanding.
Printable Specifications
|
 |
VL Series Vacuum Power Unit
The VL Series vacuum pump is the first part of a two-pump design rail car or truck unloading system. The VL Series is typically used in more demanding bulk conveying applications where the conveying distances are longer and the conveying rates are higher. This series is used in conjunction with CH Series Transfer stations and P Series Pressure Power Units.
Printable Specifications
|
|
|
P Series Pressure Power Unit
The P Series pressure power unit is the second part of a two-pump design rail car or truck unloading system. The two-pump design is typically specified when the single pump system cannot meet the desired conveying rates at the specified conveying distances. This series is used in conjunction with the CH Series Transfer stations and the VL Series vacuum power unit.
Printable Specifications
|
 |
Rail Car Hardware and Accessories
Along with the Tubing and Hardware, these components complete your bulk rail car unloading system.
Printable Specifications
|
 |
T Series Transfer Station
The T Series Transfer Station is designed for use with a dual blower conveying system.
Printable Specifications
|
